Detailed Description Of Preset Functions - Denon DN-C680 Instrucciones De Operación

ENGLISH

(3) Detailed Description of Preset Functions

(* = initial setting)
1) Ò Preset Type (*)Ó (Three different sets (types) of presettings can be made and used for different purposes.)
* Preset Type1
Preset Type2
Preset Type3
2) Ò CueDet. (Ð **)dBÓ
CueDet. (Ð **)dBÓ
3) Ò Sleep ON (OFF)Ó
* Sleep ON
Sleep OFF
4) Ò FS OFF (***kHz)Ó (This setting can only be made when an optional FS converter is mounted.)
* FS OFF
FS (***kHz)
5) Ò Program1 OFF (ON)Ó
Program1 OFF (ON)
6) Ò Program2 OFF (ON)Ó
Program2 OFF (ON)
7) Ò Program3 OFF (ON)Ó
Program3 OFF (ON)
8) Ò D.Out Pro (Cons)Ó
* D.Out Pro
D.Out Cons
9) Ò Subcode ON (OFF)Ó (When Ò D.Out ConsÓ is set above, subcodes can be output with the digital output signals.)
Subcode ON
* Subcode OFF
NOTE: 0 sec. start is not possible when the above is set to Ò Subcode ONÓ .
10) Ò End Mon. (**)secÓ
End Mon. (**)sec
End Mon. OFF
11) Ò E.O.M. (**)secÓ (Output EOM tally signal to remote pint (24))
E.O.M. (**)sec
E.O.M. OFF
12) Ò Next Stb.Off (ON)Ó
* Next Stb.OFF
Next Stb.ON
13) Ò FadeIn OFF (***s)Ó
FadeIn OFF (***s)
14) Ò FadeOut OFF (***s)Ó
FadeOut OFF (***s)
15) Ò Normal (+/Ð ***%) SpeedÓ
* Normal Speed
(+/Ð ***%) Speed
16) Ò Delay OFF (***ms)Ó
Delay OFF (***ms)
17) Ò PlayLock ON (OFF)Ó
PlayLock ON
* PlayLock OFF
18) Ò FR Disp ON (OFF)Ó
* FR Disp ON
FR Disp OFF
19) Ò CD-R TOC (NO TOC)Ó
* CD-R TOC
CD-R NO TOC
24
: Set to preset type 1.
: Set to preset type 2.
: Set to preset type 3.
: Set the audio detection level for cueing. (Ð 72/Ð 66/*Ð 60/Ð 54/Ð 48/Ð 42/Ð 36)
: Automatically turn the servo functions off if no button is operated for 30 minutes in the pause, standby or
manual search mode.
: Do not automatically turn the servo functions off.
: Do not use the FS converter.
: Select the digital output FS. (32kHz/44.1kHz/48kHz)
: Store the contents of program 1 when on. (Initial setting Ð OFF)
: Store the contents of program 2 when on. (Initial setting Ð OFF)
: Store the contents of program 3 when on. (Initial setting Ð OFF)
: Output digital signals in AES/EBU format.
: Output digital signals in consumer format.
: Output subcodes with the digital output signals. (consumer SPDIF format)
: Do not output subcodes with the digital output signals. (consumer IEC 958 Type II format)
: Set the end monitor time. (5/*10/15/20/25/30/35)
: Do not use the end monitor function.
: Set the EOM time. (0/5/*10/15/20/25/30)
: Do not use the EOM function.
: Return to the play start position and standby when the STANDBY/CUE button is pressed during playback.
: Standby at the beginning of the next track when the STANDBY/CUE button is pressed during playback.
: Set the fade in time. (*OFF/10m/50m/0.1/0.5/1/2)
: Set the fade out time. (*OFF/10m/50m/0.1/0.5/1/2)
: Play at normal speed.
: Play at variable speed. ± (0.2/0.4/0.6/0.8/1.0/1.2/1.4/1.6/1.8/2.0/2.2/2.4/2.6/2.8/3.0)
: Set the time for delayed start after the play start operation. (*OFF/100m/200m/300m)
: Inhibit all operations other than the PLAY/PAUSE, TIME and PLAY MODE buttons during playback.
: Enable all functions during playback.
: Display the frames on the time display during playback.
: Do not display the frames on the time display during playback.
(The frames are displayed in the manual search, standby, pause and end monitor modes.)
: Play normal CD-R discs containing TOCs.
: Play CD-R discs not containing TOCs.