Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
ENGLISH
B
PROFESSIONAL CD PLAYER DN-C680
POWER
¢
ON
£
OFF
LEVEL
MIN
MAX
STOP
PLAY/PAUSE
STANDBY/CUE
PHONES
5,6
-4
(3) Playing a Specific Section of the Disc (A-B Play)
¥ Use this function to set the play start and end positions and
only play the desired section of the disc.
NOTE: The A-B play mode cannot be set unless the A point, B point
or both the A and B points are set.
Find the play start position (A point).
¥ Turn the SEARCH or SCAN dial to find the desired play
1
start position.
Set the A point.
Press the Ò AÓ button.
2
A
Find the play end position (B point).
¥ Turn the SEARCH or SCAN dial to find the desired play
3
end position.
Set the B point.
Press the Ò BÓ button.
B
4
* When setting the B point during playback, the B point can
only be set if the A point is set before it.
Cue the A point.
Press the Ò AÓ button.
A
5
Ò Standby " appears on the character display.
If the STANDBY/CUE button is pressed first, press the Ò AÓ
button again.
To change the A-B section:
Press the Ò BÓ (or Ò AÓ ) button.
B
6-
1
To change
the B point
Ò Standby " appears on the character display.
16
7
2,(6
,6
)
-1
-3
OPEN/CLOSE
PROG. PLAY
PROGRAM
FINISH MODE
I
SEARCH
6 7
SCAN
ON/OFF
IN
PLAY MODE
END MON
AUTO CUE
TIME
STOP
PITCH
REPEAT
PUSH ENTER
8
9
AUTO SPACE
INDEX
NEXT
I
A
AUTO EDIT
RECUE
FADER
B
PRESET
4,6
,6
-1
-3
A
Lit
B
Lit
A
A
Lit
Flashing
STANDBY/CUE
STANDBY/CUE
Flashing
Lit
B
B
Flashing
Lit
STANDBY/CUE
STANDBY/CUE
Flashing
Lit
Find the play end point (B point) (or play start point (A
6-
point)).
2
¥ Turn the SEARCH dial to find the desired play end point.
Set the new B point (or A point).
Press the Ò BÓ (or Ò AÓ ) button.
B
B
6-
3
Flashing
To change the B point
Cue the A point.
Press the Ò AÓ button.
A
A
Lit
6-
4
STANDBY/CUE
Flashing
Ò Standby " appears on the character display.
Set the A-B play mode.
Press the PLAY MODE button.
7
PLAY MODE
A-B play mode
TRACK NO.
INDEX
A-B
Start playback.
Press the PLAY/PAUSE button.
PLAY/PAUSE
PLAY/PAUSE
Lit
8
A
Flashing
Playback starts from the A point and stops when the B point
is reached.
Ò A-BÓ flashes on the display during the A-B play mode.
Clearing the A and B points
¥ The set A and B points are cleared when the disc is
ejected.
¥ If the Ò Ð Ó
button is pressed while the A or B button is
9
flashing, the button turns off, the set A or B point is
cleared and the play mode is set to the single track play
mode.
NOTES:
The following happens if either the A or B point is not set:
¥ If only the A point is set, the B point is automatically set at
the end of the track for which the A point is set.
¥ If only the B point is set, the A point is automatically set at
the beginning of the track for which the B point is set.
If the playing time of the A-B section is shorter than the total
of the set fade in and fade out times, the fade in and fade out
settings are ignored.
When the B point is before the A point, the section from the B
point to the A point is played.
B
Lit
A
Flashing
STANDBY/CUE
Lit
Lit
REMAIN
NEXT NO.
m
s
f
A
Lit
Publicidad
Tabla de contenido
