DeLonghi La Specialista PRESTIGIO EC935X Manual Del Usuario página 13

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

LIGHTS
on
flashing
on
flashing
on (red)
flashing (red) +
flashing (orange)
on (red) +
on
(white)
EXPLANATION OF LIGHTS
The bean container (A2) is not inserted Insert bean container or check that is completely locked.
The finess of the grind regulation is in-
correct (or out of correct range)
OUT of correct
range
Presser lever (A20) is not in the correct
position
Pressing is needed
The portafilter (C1) has been detached
from the coffee mill without pressing
The portafilter has been detached be-
fore grinding has ended or pressing has
been performed too quickly
The slide of coffee grinder is clogged
The burrs are blocked by foreign matter Remove the foreign matter and clean the burrs as de-
Descaling must be performed
Descaling is underway
The rinsing cycle of descaling must be
performed
OPERATION
The container is correctly inserted when the arrow is
lined up with the
Move the selector within the 8 levels from coarse to
fine, keeping in mind to:
Always adjust the coffee mill during the grinding
Adjust one grinding level at a time and make at
least 5 coffees before adjusting again
Turn the lever back in place.
The coffee has just been ground and the filter holder
is attached to the coffee mill
Detach the portafilter and press the coffee as de-
scribed in section "3.2 The perfect dose" "add the
preground coffee in the filter"
Repeat grinding
Clean as described in section "8.5 Cleaning the
"Smart tamping station"" and section "11. Trouble-
shooting" in correspondence to the picture.
scribed in section "8.3 Cleaning the burr".
Descale the appliance as described in section "10. Descaling"
Complete the operation as described in section "10.
Descaling": the light comes white when the rinsing
cycle of descaling is underway
12
symbol and you hear a "click".
Correct
range
...

Publicidad

Tabla de contenido

Solución de problemas

loading

Tabla de contenido