PREPARING YOUR MACHINE FOR FIRST USE
13. Place a container under
the portafilter and froth-
ing wand and press OK
(B5). Repeat 2 times to
rinse the coffee circuit.
3. COFFEE DELIVERY
Step 1-grinding
Step 1-grinding
Step 2-tamping
4. Set the dose level by
adjusting the dial (B2)
starting from the min.
position.
Step 2-tamping
14. Open the steam dial for a
few seconds. For optimal
steam performance we
recommend you repeat
this action 3 or 4 times.
This is to purge the steam
circuit before frothing or
steaming your milk.
1. Add beans to hopper
(A2). Fresh is best; fill in
just with the quantity
you need.
When using the coffee grinder for the first time, leave the
knob to Min position. At the beginning, it is normal for
a few attempts to be needed before finding the correct
grinding level and quantity. We recommend starting
by using the default values, then if necessary changing
them according to the tips in section "3.1 Adjust dose".
4
1
2. The factory setting is 5
(medium grinding). If you
are not satisfied, adjust
the level according to
your personal taste and
the type of coffee (do it
while grinding).
7
2
3. Select single or double
dose filter and place in
the portafilter (C1). If you
are using the double filter,
press the X2 button (this
will double the volume of
the espresso shot as well).
5. Attach portafilter.
Once locked into place, grind-
ing will start.
3
5