Canon CS100 Manual De Instrucciones página 17

Power button/power lamp
Do not lift or move Connect Station when its power is on or it is standing by.
Dropping Connect Station or hitting it against an object may damage its hard disk.
Connect the HDMI cable to the
2
TV set.
Connect the HDMI cable to the

TV's HDMI IN terminal.
Connect the DC plug to
3
Connect Station.
Connect the plug of the DC cord

to the power terminal of Connect
Station, with the cord of the plug
facing outward, as shown in the
illustration.
Connect the power cord.
4
Connect the power cord as

shown in the illustration.
Turn on the TV set and switch
5
the TV's video input to select
the connected terminal.
Turn on Connect Station.
6
Press the power button to turn on

Connect Station.
 The connection is complete when
[Connect Station CS100]
appears on the screen.

When you turn on the power for
the first time, the power lamp
turns from orange to green, and
the Initial settings screen (p.17)
appears. (It takes approx. one
minute before Connect Station
starts.)
15