Error Messages - Canon CS100 Manual De Instrucciones

Transferring Images
You don't receive the Email from
CANON iMAGE GATEWAY when
newly signing up as a member.
There may be cases that you cannot

receive Emails from CANON iMAGE
GATEWAY when your Email is set not to
accept Emails from certain domains, etc.
Refer to the Help in CANON iMAGE
GATEWAY site (http://www.canon.com/
cig) for the details of Email settings.
Printing
Images cannot be printed.
Make sure the power to the printer, access

point, router, etc. is on.
Make sure there is no error displayed on

the printer.
Make sure the printer is connected to the

same access point or router as Connect
Station.
Copying Images to a Card
Images cannot be copied to a card.
Check if a CF card or SDXC card is

inserted (p.33).
Slide the SDXC card's write-protect switch

to the Write/Erase position.
Check the remaining capacity of the card.


Error Messages

An error related to Connect Station
appears on the TV screen.
Do as instructed in the error message.

If you are unsure how to handle the
problem, write down the error message,
and contact the nearest Canon Service
Center.
Backup and Restoring
Data cannot be backed up.
Use a self-powered external hard disk with

a capacity from 1 to 2 TB.
An external hard disk for backup cannot be

used for copying images.
Using new external hard disk is

recommended for backup.
Images are gone after
I restore data.
When you restore data, images that are

not backed up are deleted.
Blinking of Lamps
All the lamps are blinking.
The firmware is being updated (p.71). The

lamps stop blinking when the update is
complete.
An error message appears
during firmware update.
Under the [Preferences: e] tab, select

[Update firmware] to update the firmware
again (p.71). If error message remains
after updating the firmware again, contact
the nearest Canon Service Center.
77