Printing Still Photos - Canon CS100 Manual De Instrucciones

Printing Still Photos

Print the still photos imported to Connect Station.
Printer that can be connected
You can print by connecting Connect Station to a printer supporting PictBridge
(Wireless LAN) or PictBridge (LAN) via an access point or a router.
Setting Up a Printer
Select the printer to connect to. Before performing this operation, connect the printer
to the same access point or a router as Connect Station.
Operate the printer to connect
1
to the access point, router,
etc.
Select [Preferences].
2
Select [Preferences] on the

Home screen.
Select [Printer selection].
3
Under the [b] tab, select

[Printer selection].

The printers that can be
connected will be listed.
Select a printer.
4
Press the <d> <f> keys to

select the printer, then press
<S> to append [z] for the
printer to be connected.
If only one printer has been

detected, [z] is already
appended.
After checking that [z] is

appended, press <B> or
<H> to exit the setting screen.
39