Canon CS100 Manual De Instrucciones página 9

Ocultar thumbs Ver también para CS100:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

If the remote control becomes hot, or emits smoke or a burning smell, immediately remove
the batteries from the remote control with enough care to avoid burns. Using the remote
control in such a condition may cause a fire or burns.
Do not touch the battery fluid leaked from the remote control. If the fluid comes in contact
with the skin or clothes, remove it immediately with clean water. If the fluid gets in your eye,
rinse the eye immediately with clean water and see a doctor.
To prevent fire, excessive heat, chemical leakage, explosions, and electrical shock, follow
the safeguards below for the batteries:
• Do not use or recharge any batteries not specified in the Instruction Manual. Do not use
any home-made or modified batteries. Do not short-circuit, disassemble, or modify the
battery. Do not apply heat or solder to the battery. Do not expose the battery to fire or
water.
• Do not insert the battery's plus and minus ends incorrectly.
• Do not mix new batteries with used ones or batteries of different types.
When disposing of a battery, insulate the electrical contacts with tape to prevent contact with
other metallic objects or batteries. This is to prevent a fire or an explosion.
Keep equipment out of the reach of children and infants, including when in use, and be
aware of the cautions below.
• Looping the power cord or DC cord around the neck may result in suffocation.
• Looping the power cord or DC cord around the neck or body may cause an electrical shock
or injury.
• Swallowing any of the accessories (parts) or batteries may result in suffocation or injury. If
a child or infant swallows any of these, see a doctor immediately. (There is a risk of the
battery fluid damaging stomach and intestines.)
Cautions: Follow the cautions below. Otherwise, physical injury or
property damage may result.
Do not use or store the product where it will be exposed to high temperatures (place
exposed to direct sunlight, trunk or dashboard of a car, etc.). The product may become hot
and cause skin burns.
Do not place the product on an unstable location. Doing so may cause the product to fall,
resulting in injury or malfunction.
Do not leave the product in a low-temperature environment. The product will become cold
and may cause injury when touched.
Do not connect the AC adapter to a voltage transformer for overseas travel, etc. Doing so
may result in malfunction of the AC adapter.
If the remote control will not be used for an extended period, make sure to remove the
batteries to avoid damage or corrosion to the product.
7

Publicidad

Tabla de contenido

Solución de problemas

loading

Tabla de contenido