Steam-Cleaning Glass Surfaces; Refreshing Upholstery And Clothing - Dirt Devil AquaClean M317 Manual De Instrucciones

M317.book Seite 47 Montag, 30. September 2013 1:40 13
4 Use

4.3 Steam-cleaning glass surfaces

!
30 cm
23
24

4.4 Refreshing upholstery and clothing

25
26
ATTENTION:
Cold glass surfaces can shatter as a result
of heat shock. Always warm glass surfaces
before using steam on them. Do not work
on window panes on cold days!
1. Warm the glass surface to be cleaned by
applying steam from a distance of about
30 cm (Fig. 23).
2. After a time reduce the distance to about
20 cm to cover the glass surface evenly
with steam.
3. Stop the supply of steam by releasing the
steam button.
4. Strip the water off of the glass surface with
the scraper lip of the 2-in-1 combi attach-
ment (Fig. 24).
5. Wipe the scraper lip and the bottom edge
of the glass surface dry after each pass of
the squeegee.
WARNING:
Danger of scalding! Never apply the steam
jet directly to pieces of clothing while they
are still being worn by persons or animals!
ATTENTION:
Before refreshing upholstery or clothes,
make sure that their material and colour is
suitable for steam cleaning. And follow the
cleaning recommendations of the material
manufacturers.
NOTE:
We recommend always using the cotton
cover (Fig. 25) when refreshing upholstery
or clothing as this reduces the formation of
condensation drops that can adversely
affect the cleaning result.
47