Descargar Imprimir esta página

Fein Slugger JME HoleMaker III Instrucciones De Uso página 18

Publicidad

Idiomas disponibles

Idiomas disponibles

en
18
Working instructions.
When there is danger of falling down, secure the machine using the provided
WARNING
safety strap; especially when working aloft, on vertical building elements or
overhead. In case of a power failure or when the mains plug is pulled, the magnetic holding
power is not maintained.
Always carry the power tool by its han-
dle, not by the drill-motor cable.
Fastening the safety strap (figure 8).
Always fasten the machine securely around
the workpiece using the provided safety
strap.
Fig. 7
Fig. 8
Clamping strap

Publicidad

loading

Este manual también es adecuado para:

Slugger jme usa 202 m7 270 59 61 09 07 270 69 61 09 0