Fein Slugger JME HoleMaker III Instrucciones De Uso página 7

Wood and light-metal dust can
CAUTION
cause spontaneous combus-
tion or explosions.
Hot mixtures of sanding dust and paint/var-
nish residuals or other chemical materials in
the filter bag or the vac filter can self-ignite
under unfavourable conditions, such as spark-
ing from sanding metal, continuous sunlight
or high ambient temperatures. To prevent
this:
Emission values for sound (Two-figure – specifications as per ISO 4871)
Sound emission
A-weighted emission pressure power level
measured at the workplace
in decibels
Measuring uncertainty
Measured A-weighted sound power level
L
(re 1 pW), in decibels
wA
Measuring uncertainty
C-weighted peak sound pressure level mea-
sured at the workplace
Measuring uncertainty
Mean vibrational value (core drilling)
2
– m/s
2
– ft/s
Measuring uncertainty
2
– m/s
2
– ft/s
REMARK: The sum of the measured emission value and respective measuring inaccuracy
represents the upper limit of the values that can occur during measuring.
Wear hearing protection!
Measured values determined in accordance with the corresponding product standard.
Extension cable.
If the use of an extension cord
WARNING
is required, its length and con-
ductor cross-section must be adequate for the
application in order to prevent a voltage drop
in the extension cord, power loss and over-
heating of the power tool. Otherwise, the
extension cable and power tool are prone to
electrical danger, and the working efficiency is
decreased.
L
(re 20 μPa),
pA
K
, in decibels
pA
K
, in decibels
wA
L
, in decibels
pCpeak
K
, in decibels
pCpeak
K
, in
– Avoid overheating the material being
sanded and the power tool.
– Empty the dust collector/container rou-
tinely.
– Observe the material manufacturer's
working instructions.
– Observe the relevant regulations for the
materials being worked.
JME HoleMaker III (**)
91.6
102.6
106.1
< 2.5
en
JME USA 202 M (**)
3
3
3
8.3
1.5
4.9
7
92.8
3
103.8
3
106.9
3
< 2.5
8.3
1.5
4.9