Fein Slugger JME HoleMaker III Instrucciones De Uso página 22

en
22
Activating and deactivating the cool-
ant-lubricant flow (figure 12).
To activate the cooling-lubricant flow,
open the ventilation first and then turn
the flow valve to the position shown.
For switching off or when working
overhead, deactivate the cooling-lubri-
cant flow. Shut the ventilation and turn
the flow valve to the position shown.
When working overhead, use a cooling-lubri-
cant paste from Slugger.
Fig. 12
1.
Ventilation
2.