Fein Slugger JME HoleMaker III Instrucciones De Uso página 21

Adjusting the stroke range (figure 11).
Hold the machine firmly with
CAUTION
one hand by the drill motor
when loosening the two fastening screws.
Loosen both fastening screws using a hex key.
Adjust the desired stroke range.
Tighten both fastening screws again.
Fig. 11
6 mm
4.
4.
6 mm
3.
1.
en
2.
2.
1.
2.
4.
2.
4.
21
3.