Intended Use; Safety Devices - Cub Cadet 17AICBYQ603 Instrucciones De Funcionamiento Originales

Intended use

Intended use
This device is designed to be used
- as a lawn tractor for mowing lawns in the house
garden and leisure garden,
- with accessories which are approved expressly for
use with this lawn tractor,
- In accordance with the descriptions and safety
instructions given in these operating instructions.
Any other use is classed as an unintended use.
Improper use is not covered by the warranty and
the manufacturer will reject any liability. The user is
liable for injuries to third parties and damage to their
property.
Unauthorised changes to the device exclude liability
of the manufacturer for any resulting damage and/
or injury.
This mower is not licensed for use on public roads
or for transporting people.
the driver's seat.
9
MODEL NUMBER
1
XX/XXXX
XXXXXXXXXXX
2
XXXXXXXXX
XXX KG
4
Layout
1 Model number
2 Model name
3 Weight
4 CE mark
5 Manufacturer
6 Engine speed (rpm)
7 Output
8 Serial number
9 Year of construction
769-12352
DOM SERIAL NUMBER
XXXXXXXXXXX
XX,X KW
XXXX /MIN
Assembled in USA from U.S. &
Global components
MTD PRODUCTS AG
INDUSTRIESTR. 23
D 66129 Saarbrücken

Safety devices

Discharge flap
Contact with the cutting blade and items
Risk of injury
Only operate the device with a discharge
Safety locking system
The safety locking system will only allow the engine
to start when
- The driver is sitting on the seat.
- The brake pedal has been depressed or the park-
ing brake is in the park position.
- the cutter deck has been switched off; i.e.: PTO
switch set to "O/Aus/Off" (PTO = Power-Take-Off).
The safety locking system automatically switches
the cutter deck (PTO) off as soon as the operator
leaves the seat with the PTO activated, irrespective
of whether the parking brake was actuated
beforehand.
The safety locking system automatically switches
the engine off as soon as the operator leaves the
seat without actuating the parking brake beforehand.
In devices without an OCR function or with a
deactivated OCR function, the safety locking
8
system prevents reversing with the cutting
7
6 mechanism activated (automatic shutdown of the
cutting mechanism).
Prior to reversing, switch off the cutting mecha-
nism using the PTO switch.
5
In the case of automatic shutdown through
the safety locking system (e.g. reversing or
leaving the seat with the cutting mechanism
then back on again, to release the clutch
lock (PTO).
Directional references
Directional references on the device (e.g. left, right,
etc.) always refer to when facing forwards.
[A]
CAUTION!
EN
13