Intended Use; Identification Plate; Safety Devices; Assembly - Cub Cadet 17AIEACI603 Instrucciones De Funcionamiento Originales

Intended use

Intended use
This device is designed to be used
- as a lawn tractor for mowing lawns in the house
garden and leisure garden,
- with accessories which are approved expressly for
use with this lawn tractor,
- in accordance with the descriptions and safety
instructions given in these operating instructions.
Any other use is classed as an unintended use.
Improper use is not covered by the warranty and
the manufacturer will reject any liability. The user is
liable for injuries to third parties and damage to their
property.
Unauthorised changes to the device exclude liability
of the manufacturer for any resulting damage and/
or injury.
This mower is not licensed for use on public roads
or for transporting people.

Identification plate

You will find the identification plate under/in front of
the driver's seat.
MODEL NUMBER
1
XXXXXXXXXXX
2
XXXXXXXXX
XXX KG
4
Layout
1 Model number
2 Model name
3 Weight
4 CE mark
5 Manufacturer
6 Engine speed (rpm)
7 Output
8 Serial number
9 Year of construction
9
DOM SERIAL NUMBER
XX/XXXX XXXXXXXXXXX
XX,X KW
XXXX /MIN
Assembled in USA from U.S. &
Global components
MTD PRODUCTS AG
INDUSTRIESTR. 23
D 66129 Saarbrücken
Discharge flap N [A]
Contact with the cutting blade and items
flung out
ÂRisk of injury
¾ Only operate the device with a discharge
flap attached and lowered.
Safety locking system
The safety locking system will only allow the engine
to start when
- the driver is sitting on the seat.
- the cutter deck has been switched off; i.e.: PTO
switch set to "O/Aus/Off" (PTO = Power-Take-Off).
- both drive control levers are in the outer neutral
recesses. Note: At the same time the parking
brake is activated in this position (park position).
The safety locking system automatically switches
the engine off as soon as the operator leaves
the seat with the cutter deck activated (PTO),
irrespective of whether the parking brake was
actuated beforehand.
The safety locking system automatically switches
the engine off as soon as the operator leaves the
seat without actuating the parking brake beforehand.
Note
8
The parking brake is activated if both drive
7
control levers are in the outer neutral recess-
6
es.
Directional references
5
Directional references on the device (e.g. left, right,
etc.) always refer to when facing forwards.
Note
To be able to move the device manually, the
gear release lever must be in the appropri-
ate position. Refer to the section "Operation
– Pushing the mower".

Safety devices

CAUTION!

Assembly

EN
13