JVC BD-X200E Manual Del Usuario página 33

Erasing All Data From a DVD-RW Disc
DISC MENU screen
DISC MENU
MENU
FINALIZE
CANCEL DISC FINALIZATION
( QUICK )
DISC ERASE
DISC ERASE
( FULL )
DISC ERASE (QUICK)
Note
When either a new DVD-RW or one that
has been erased on another machine is
inserted, quick erase starts up.
Canceling the Finalization of a DVD-RW
When adding an extra recording to a finalized DVD-RW, cancel the finalization.
DISC MENU screen
DISC MENU
MENU
FINALIZE
CANCEL DISC FINALIZATION
( QUICK )
DISC ERASE
DISC ERASE ( FULL )
CANCELING DISC FINALIZATION
DISC ERASE (QUICK)
All manuals and user guides at all-guides.com
1.
Insert the DVD-RW from which data is to be erased.
2.
Press the SET UP button to display the Setup Menu.
Use the 7 and 6 buttons to select DISC MENU and then press
3.
CANCEL
CANCEL
the SET button.
EXECUTE
● The DISC MENU screen will appear.
CANCEL
Press the 7 or 6 button, select either the DISC ERASE (QUICK)
4.
item or the DISC ERASE (FULL) item, then press the SET button.
● The setting value list box is displayed.
DISC ERASE (QUICK) : Only the disc control area is erased. (Quick Erase)
DISC ERASE (FULL) : All areas of the disc are erased. (Full Erase)
Use the 7 and 6 buttons to select EXECUTE from the list and
5.
then press the SET button.
● The erasing of data will begin.
The message "DISC ERASE" appears and the state of progress is displayed
using a progress bar.
● When all data has been erased, the progress bar will disappear.
CAUTION
● All of the data recorded to the disc will be erased in this process. Before
starting, therefore, confirm that no important data is stored on this disc.
● Under no circumstances should the power be turned off or the power cord
disconnected while data is being erased.
1.
Insert the DVD-RW whose finalization you want to cancel.
2.
Press the SET UP button and the set up top menu screen will be
displayed.
CANCEL
EXECUTE
Press the 7 or 6 button to select the DISC MENU item, then
3.
CANCEL
CANCEL
press the SET button.
● The DISC MENU button is displayed.
Press the 7 or 6 button, and select the CANCEL DISC
4.
FINALIZATION item, then press the SET button.
● The setting value list box is displayed.
Press the 7 or 6 button, select EXECUTE from the list box,
5.
then press the SET button.
● Cancellation of finalization starts.
Execution status will be displayed on a progress bar.
● When complete, the progress bar disappears.
Notes
● When canceling finalization the TOP MENU created when finalizing is
deleted.
● Discs finalized on another machine cannot be cancelled.
Compared with Full Erase the time to erase is
shorter.
This setting is recommended for repeated use of
a disc.
E-31