JVC BD-X200E Manual Del Usuario página 84

DVD Dubbing
Dubbing DVDs Using the LAN Terminal (continued)
Dubbing (continued)
4.
Sender device
DVD † DVD
RECEIVER Searching . . .
SENDER IP ADDRESS † 192:168:000:002
ABORT
5.
Confirmation box for the start of
dubbing
DVD † DVD
DUBBING START
SENDER IP ADDRESS † 192:168:000:002
EXECUTE CANCEL
RECEIVER IP ADDRESS † 192:168:000:003
During Dubbing
DVD † DVD
DUBBING
ABORT
Receiver device
DVD † DVD
DUBBING
ABORT
6.
DUBBING MENU screen
DUBBING
MENU
DVD † DVD
E-82
All manuals and user guides at all-guides.com
4.
Sender device
The sender device will begin searching for receiver devices.
SENDER
● When connection has been completed, a dialog box for confirming the start
of dubbing will appear.
● The IP address of the identified receiver device will be displayed in the dialog
box for confirming the start of dubbing.
5.
Sender device
To proceed with dubbing, select EXECUTE in the confirmation box for
the start of dubbing and press the SET button.
● DVD to DVD dubbing will begin.
As dubbing is carried out, the state of progress will be displayed on the
monitor connected to each device in the form of a progress bar.
Notes
● Dubbing will not be carried out if CANCEL is selected from the
SENDER
confirmation box for the start of dubbing.
● When dubbing a complete disc, approximately 90 minutes will be
required to complete the process.
● Do not disconnect any cables during the dubbing process.
If cable are accidentally disconnected, both devices should be turned
off once and then restarted before subsequent use.
6.
Dubbing proceeds to completion.
When dubbing has ended, the display for the sender device returns to the
DUBBING screen.
SENDER
Finalizing is performed automatically by the receiver device.
To cancel dubbing:
If ABORT from the DUBBING screen is selected and confirmed, the
State of
following confirmation box will be displayed.
progress
RECEIVER
Aborting makes the media a UNUSABLE !
RECIEVER disc cannot be re-used.
EXECUTE
EXECUTE
● Select EXECUTE and then press the SET
button to cancel the dubbing process and
DVD † DVD
SENDER
return to the DUBBING menu.
● Select CANCEL and press the SET button
to close the confirmation window without
canceling the dubbing process.
CANCEL
● If dubbing is canceled, the partially-
recorded DVD will no longer be usable.