Saving and Reading Edit Lists on the EDL MANAGER Screen
How to operate the EDL MANAGER screen and its contents
The EDL MANAGER screen is for registering edit lists (EDL). Event data from the REMOTE CONTROL screen of this machine can
be saved as edit lists in the EDL MANAGER screen. Also, edit lists registered on the EDL MANAGER screen can be read into the
event register list of the REMOTE CONTROL screen.
REMOTE CONTROL SCREEN ( 9PIN MASTER )
EXIT
No.
OUT
IN
ACTION
1
01
01
00 00 00 00
:
:
:
:
:
:
CHAPTER
2
01
02
00 01 30 00
:
:
:
:
:
:
CHAPTER
3
:
:
:
:
:
:
01
03
00 02 30 00
00 03 30 00
STOP
CHAPTER
MANUAL
TOTAL DURATION
00h
ADJ
BITRATE
8.0 Mbps
DISC REMAIN
030 min
TC
SET
EDL
FINALIZE
CANCEL
EDIT/END
TC
SOURCE TIMECODE
00 03 30 00
Notes
● If a file is registered in the EDL item, the
characters are blue.
● In the case of an edit list for MASTER, "M" is
displayed before the EDL item. In the case
of an edit list for SLAVE, "S" is displayed
before the EDL item.
All manuals and user guides at all-guides.com
To display the EDL MANAGER screen
Select the EDL item on the REMOTE CONTROL screen, then press the
"Enter" key on the keyboard.
MENU
00
03m 30s
EDL item
:
:
:
3.
BACK
1.
2.
Method of operation
Select the EDL item to be used, next select the function item, then execute.
(Example: Save the current setting value of the REMOTE
CONTROL screen as EDL08.)
1.
Select the EDL item to be used (EDL08).
Place the cursor on the EDL08 item and press the "Enter" key on the
keyboard.
● The EDL08 item is displayed as highlighted.
2.
Move the cursor to the SAVE item, and press the "Enter" key.
● The event data of the REMOTE CONTROL screen is saved in EDL08.
3.
To finish operations on the EDL MANAGER screen select the
BACK item, and press the "Enter" key.
● The display returns to the REMOTE CONTROL screen.
EDL MANAGER screen
EDL
MANAGER
EDL01
EDL02
EDL03
EDL04
EDL05
EDL06
EDL07
EDL08
M
EDL09
S
EDL10
SAVE
LOAD
NAME
IMPORT
DELETE
EDL item
Function item
E-69