Title & Chapter Menu Settings
Changing & Naming Thumbnails for Chapter Menus
The modification of chapter menu thumbnails and the entry of names and comments are carried out as described below using the
THUMBNAIL EDIT screen.
Changing thumbnails
THUMBNAIL EDIT screen
THUMBNAIL EDIT
TITLE CLOSE
AAA
BBB
CCC
1.
1
2
3
DDD
EEE
4
5
CHAPTER MENU
TEXT LOAD
TEMP LOAD
THUMBNAIL EDIT
BACK
2.
CHAPTER
BBB
LENGTH:
5000 sec
2
POSITION:
40/100
PREVIEW
TEXT INPUT
THUMBNAIL EDIT
3.
BACK
CHAPTER
BBBB
LENGTH:
5000 sec
2
POSITION:
50/100
PREVIEW
TEXT INPUT
Checking thumbnails
THUMBNAIL EDIT
TITLE CLOSE
AAA
BBBB
CCC
1.
1
2
3
DDD
EEE
FFF
4
5
6
CHAPTER MENU
TEXT LOAD
TEMP LOAD
THUMBNAIL EDIT
BACK
CHAPTER
BBB
LENGTH:
5000 sec
2
POSITION:
40/100
2.
PREVIEW
TEXT INPUT
3.
BACK
BBBB
E-50
All manuals and user guides at all-guides.com
For example, let's change the thumbnail for the second chapter.
1.
Select the second chapter and press the SET button.
1 - 6
● The thumbnail screen for this chapter will be displayed.
The CHAPTER LENGTH item displays the chapter length (sec.).
The denominator of the POSITION item is the range in which the thumbnail
can be changed. The numerator shows the current display position.
2.
Select the thumbnail to be used for the second chapter.
Thumbnails can be selected using the † and © buttons found on this screen.
● If you select † and press the SET button, the image* recorded after the
selected thumbnail will be displayed. Each time the SET button is pressed, a
subsequent image will be displayed. (*Image after 15 frames)
By selecting the †† item and pressing the SET button, the display moves
forward by 10 frames.
● If you select © and press the SET button, the image recorded before the
selected thumbnail will be displayed. Each time the SET button is pressed, a
previous image will be displayed.
By selecting the ©© item and pressing the SET button, the display moves
backward by 10 frames.
3.
Select BACK and press the SET button to change that chapter's
thumbnail.
THUMBNAIL EDIT
TITLE CLOSE
AAA
1
DDD
4
CHAPTER MENU
* Thumbnail of the title menu will be the top thumbnail of the chapter menu.
Use the following procedure to confirm that thumbnails are as desired by displaying
them in full-screen mode.
1 - 6
For example, let's look at the thumbnail for the second chapter.
1.
Select the second chapter and press the SET button.
● The thumbnail screen for this chapter will be displayed.
2.
Select PREVIEW and then press the SET button.
● The thumbnail image for this chapter will be displayed in full-screen mode.
3.
Select BACK and press the SET button to return to the THUMBNAIL
EDIT screen.
● The initial THUMBNAIL EDIT screen is
displayed once again.
1 - 6
The thumbnail for the second chapter will have
BBBB
CCC
changed to that just selected.
2
3
EEE
FFF
5
6
TEXT LOAD
TEMP LOAD