Preset Style Menu Screen; Recorder Menu Screen - JVC BD-X200E Manual Del Usuario

Setup Menu

PRESET STYLE MENU Screen

The following table identifies and describes the parameters that may be set using the PRESET STYLE MENU screen.
Top half : Appearance on monitor screen
Bottom half : Appearance on LCD display
[ ] : Default setting
Parameter Possible settings
STYLE [TYPE1]
TYPE2
TYPE3
TYPE4
TYPE5
TYPE6
TYPE7
TYPE8
BACK
STYLE
bACK
TITLE PATTERN [1] to 6
BACK
TITL P [1] to 6
bACK
CHAPTER [1] to 6
PATTERN BACK
CHAP P [1] to 6
bACK
MENU

RECORDER MENU Screen

The following table identifies and describes the parameters that may be set using the RECORDER screen.
Top half : Appearance on monitor screen
Bottom half : Appearance on LCD display
[ ] : Default setting
RECORDER MENU (1/2) screen
Parameter Possible settings
CHAPTER [MANUAL]
CREATION AUTO
CHAPTR [MANU]
AUTo
E-88
All manuals and user guides at all-guides.com
This parameter is used to select one of the eight different display styles that have
been provided for title and chapter menus. (☞ Page 46)
BACK : Returns to the PRESET STYLE menu screen.
Default Settings
TYPE
1
2
[T1]
3
T2
4
T3
5
T4
T5
6
T6
7
T7
8
T8
This parameter is used to open the TITLE PATTERN screen.
That screen can then be used to select a display pattern for the title menu.
BACK: Returns to the PRESET STYLE menu screen.
* 6 cannot be selected when setting for factory shipment.
This parameter is used to open the CHAPTER PATTERN screen.
That screen can then be used to select a display pattern for the chapter menus.
BACK: Returns to the PRESET STYLE menu screen.
* 6 cannot be selected when setting for factory shipment.
This button is used to return to the Setup Menu screen.
This parameter is used to indicate whether or not chapters are to be created
automatically at set intervals while recording.
MANUAL : Chapters are not to be created automatically.
Use this setting when chapters are to be set manually.
AUTO : Chapters are to be created at set intervals during recording.
The SET INTERVAL parameter below is used to specify this interval.
Description
TITLE PATTERN CHAPTER PATTERN
1
2
3
4
5
1
2
3
Description
1
2
3
4
5
1
2
3