Adjusting Of Audio Recording Levels - JVC BD-X200E Manual Del Usuario

Adjusting of Audio Recording Levels

This DVD recorder's audio recording levels can be adjusted using two different methods, and AUDIO REC VOLUME MODE from
the RECORDER MENU (2/2) screen indicates the method to be used. In addition, it is also possible to return the audio recording
levels to their default settings (i.e., unity gain).
Note: The AUDIO INPUT LEVEL switch on the DVD recorder's rear panel can be used to select the reference input level for analog
audio (i.e., +4 dB or –8 dB).
Selecting the Adjustment Method
RECORDER MENU (2/2) screen
RECORDER MENU (2/2)
BACK
Y/C TERMINAL MODE
THUMBNAIL FORM
AUDIO CHANNEL (DV)
AUDIO REC VOLUME MODE
DISC IN ACTION
TITLE END
DVD MENU TYPE
INTRODUCTION TITLE
Adjusting the Audio Recording Levels
Audio level indicator
Return from setting screens to the normal display.
Recording levels can be adjusted in either Stop or Recording mode. Be sure to monitor the front panel's audio level indicator as
the levels are being adjusted. Adjust the level so that the LED on the far right does not light.
Adjusting both channels together (BOTH)
To raise the recording level
Press the 6 button while holding the 8 or
t button to raise the audio recording levels
for Channel
SET
simultaneously.
To lower the recording level
Press the 7 button while holding the 8 or
t button to lower the audio recording levels
for Channel
SET
simultaneously.
Returning Audio Recording Levels to Default Settings (UNITY MODE)
Press and hold the 8 and t buttons simultaneously to return the audio recording levels to their default settings (i.e., unity gain).
● Both of the audio recording levels will be fixed at the default setting.
All manuals and user guides at all-guides.com
1.
Open the RECORDER MENU (2/2) screen.
To do this, select † button from the RECORDER MENU (1/2) screen and
press the SET button.
S1
2.
Make the required setting using AUDIO REC VOLUME MODE
NORMAL
1,2ch † 1,2ch
from the RECORDER MENU (2/2) screen.
BOTH
BOTH
MENU
MENU
TOP+MENU
INDEPENDENCE
OFF
OPERATE
DVD RECORDER BD-X200
AUDIO
TITLE
CH1
DOLBY DIGITAL
LPCM MPEG
CH2
PHONES REV STOP PLAY
1 and Channel
1 and Channel
: Audio levels are adjusted while both the CH1/CH2
are maintained at the same volume.
: The CH1/CH2 are adjusted separately.
BUSY
OPEN/CLOSE
OPTION DV Y/C LINE
SET UP
CHAPTER
SET
TOP
FWD PAUSE REC
MENU MENU
Adjusting both channels separately (INDEPENDENCE)
To adjust the Channel 1 level
Press either the 6 or 7 button while
holding the 8 button.
Pressing the 6 button raises the recording
2
SET
level.
Pressing the 7 button lowers the recording
level.
To adjust the Channel 2 level
Press either the 6 or 7 button while
holding the t button.
Pressing the 6 button raises the recording
2
SET
level.
Pressing the 7 button lowers the recording
level.
Buttons used
E-37