JVC BD-X200E Manual Del Usuario página 72

Synchronous Recording
Saving and Reading Edit Lists on the EDL MANAGER Screen (continued)
How to operate the EDL MANAGER screen and its contents
Item Function
BACK Returns to the REMOTE CONTROL screen.
EDL01 ~ EDL10 Edit list (EDL) registration area.
When selected and the "Enter" key is pressed it is highlighted.
If a file is registered in the EDL item, the characters are blue.
In the front "M" is displayed for MASTER, and "S" is displayed for SLAVE.
SAVE When the EDL item is highlighted and this item is pressed, the current setting values of the REMOTE
CONTROL screen are saved.
LOAD When the EDL item is highlighted and this item is pressed, the selected EDL is registered on the
event register list of the REMOTE CONTROL screen.
However, only M files are valid for a REMOTE CONTROL screen for MASTER, and only S files are
valid for a REMOTE CONTROL screen for SLAVE.
NAME When the EDL item is highlighted and this item is pressed, the EDL item can be named. Up to 20
ASCII characters can be used (up to 16 characters are displayed).
IMPORT When the EDL item is highlighted and this item is pressed, EDL imported from EasyMenu or other
external edit lists are registered. (☞ Page 71)
DELETE When the EDL item is highlighted and this item is pressed, the selected EDL item is deleted.
About EDL
In SLAVE mode CSV files and SONY format EDL files can be used.
In MASTER mode only CSV files can be used.
CSV files have the same file name for both MASTER and SLAVE modes, but the files are not compatible.
Use the correct format file.
Details of the MASTER mode CSV file
File name: X200.csv
In one line, IN, OUT, ACTION, MENU are written in that order, with a "," comma in between them.
The IN/OUT time code values are hour minute second frame with a ":" colon between them.
(Example)
00:00:00:00, 00:00:10:00, STOP, 1
00:00:00:00, 00:10:10:00, PAUSE, 0
00:10:20:00, ,
* Always enter a line break code at the end of an event.
● For ACTION, if one of the initial characters S, P, C is entered the rest of the characters can be omitted.
● OUT, ACTION, and MENU can be omitted. In this case write a space + a comma.
When ACTION is omitted, the OUT point is ineffective, so the following is done.
If the OUT point is registered → PAUSE
When MENU is omitted, the setting value of the CHAPTER PATTERN item of the PRESET STYLE menu screen is used. (0
display)
E-70
All manuals and user guides at all-guides.com
EDL MANAGER
BACK
EDL01
EDL02
EDL03
EDL04
EDL05
EDL06
EDL07
M EDL08
EDL09
S
EDL10
SAVE LOAD
IMPORT DELETE
,
OUT point not registered → CHAPTER
NAME
EDL item