Technical Specifications - Grabo PRO-LIFTER 20 Manual Del Operador

GRABO® PRO-LIFTER 20
EN
NL
DE
INTRODUCTION
FR
The GRABO® Pro-Lifter 20 is a portable electric vacuum lifting device intended to lift, move, and
ES
place objects such as tiles, stone pavers, drywall, glass and furniture. The GRABO® Pro-Lifter 20
IT
has a built-in pressure sensor with an automatic start/stop function. The GRABO® Pro-Lifter 20 is
SE
designed to work with dry, rough and slightly porous material. The GRABO® Pro-Lifter 20 is not
DK
intended:
AR
RU
to be used for climbing or securing the human body in any way. This product is not designed or
l
TR
intended for climbing or to support a person's weight. Using this product for climbing or any
other unintended purpose may result in injury or death.
to lift, move, or place objects consisting of very porous, soft/flexible, and crumbling materials,
l
such as simple cardboard boxes, styrofoam, dry cast pavers, compressed sand, or bad quality
concrete.
! Read this instruction manual carefully before use and save it for future reference

TECHNICAL SPECIFICATIONS

Electric vacuum lifting device
Dimensions
Net weight (with battery)
Battery
Battery type
Battery rated capacity
Nominal voltage/Charge voltage
Charge current
Rated power
Overcharge protection
Working time (full charge)
Operating temperature
Storage temperature battery
Long-term storage battery (> 3 months)
10
GRABO® Pro-Lifter 20
300 x 184 x 118 mm/11.8 x 7.2 x 4.7 inches
1.5 kg/3.2 lbs
Li-ion 2600 mAh/14.8 V (4x cells 3.7 V)
2.6 Ah
14.8 V/16.8 V
520 mA
16 W
4.25 V
1.5 hours
0 °C ... +45 °C/+32 °F ... +115 °F Charge -20 °C ...
+60 °C/-4 °F ... +140 °F Discharge
-40 °C ... +125 °C/-40 °F ... +257 °F
+5 °C ... +20 °C/+40 °F ... +70 °F Charged to 14.4
– 15.6 V (80 – 90% of full charge)
➋