Grabo PRO-LIFTER 20 Manual Del Operador página 22

REPLACING OR CLEANING THE AIR FILTER ❾
EN
NL
Clean the filter when dirty. The filter needs to be replaced when the filter is badly worn or ripped (at
DE
customer's discretion). This is determined by how the GRABO® Pro-Lifter 20 is being used. When
FR
lifting clean material, the filter will last longer than when being used on dirty/dusty materials.
ES
1. Turn the GRABO® Pro-Lifter 20 upside down.
IT
2. Use the tip of a screwdriver to remove the air filter lock ring Ⓚ and the air filter pad Ⓙ .
SE
3. Do one of the following:
DK
AR
a. Clean the filter with compressed air, or
RU
b. Insert a replacement air filter pad.
TR
4. Insert the air filter lock ring to secure the filter.
! Do not clean a dirty air filter with water! It may become clogged and unusable.
! A decrease in suction power indicates that the air filter needs to be cleaned and/or replaced.
Check that the air duct is free from any obstruction or foreign objects during filter replacement.
WARRANTY
30-DAY MONEY BACK HARD GUARANTEE
New unused power tools and accessories purchased from Nemo Power Tools or one of our
authorized dealers can be returned to our Las Vegas warranty center within 30 days of purchase.
Please contact your dealer to ask about their specific store policy, or ship your product (prepaid) in
its original undamaged packaging along with the original receipt to: Nemo Power Tools LLC,
Eastern Commerce Center, 6000 S Eastern Ave, Suite 8B, Las Vegas, Nevada, 89119
1-YEAR LIMITED WARRANTY
Nemo Power Tools prides itself on its attention to detail, the quality of its products and materials
used. Therefore, we provide this manufacturer's warranty from the date of purchase. You have the
option of registering your GRABO® Pro-Lifter 20 product online, which gives you the benefit of
extending the manufacturer's warranty to a full 18-month period. If you believe you have received a
defective product, or if you are experiencing any problems with your product, please visit our
Support page - www.GRABO.com/GRABO-warranty. Within the scope of this 1-year warranty, we
will repair or replace, any defects of material or workmanship free of charge. For warranty repair
information, call +1 (702)-718-2433. This warranty does not apply if the damage was caused by
improper usage of the tool such as water damage, dropping the tool, overloading the tool beyond
its rated capacity, leaving the tool "on" while in storage, or any other clear cases of user error. This
warranty gives you specific legal rights, and you may have other rights which vary in certain states or
provinces. Nemo Power Tools Limited will attempt to diagnose any technical issues over the phone
or via email, based on the customer's description of the problem including videos/pictures of the
faulty product sent to our technical team. In certain situations, a physical examination of the tool
may be required to determine whether a technical issue falls within the scope of this 1-year limited
warranty. If a physical examination of the tool is required, shipping to our Las Vegas warranty center
will be covered by the customer, and return shipping will be covered by Nemo Power Tools.
22