General Specifications; Scope Of Delivery - Grabo PRO-LIFTER 20 Manual Del Operador

EN
Estimated maximum lifting forces as tested on different materials
NL
DE
Glass
FR
Ceramic tile
ES
IT
Metal
SE
Plastic
DK
Wood
AR
RU
Rough concrete
TR
Dry cast pavers
Drywall
NOTICE: When the vacuum level drops below -0.65 Bar (-65 kPa), the GRABO® Pro-Lifter 20 will
automatically restart the pump (when the pump is switched on), thereby achieving the pressure
required for use.

General specifications

Running cycles (on full charge)
Rated air flow
Applicable surface type

SCOPE OF DELIVERY

NOTICE: The exact scope of delivery may change, but it will always contain the items listed below.
If your delivery contains any additional items, these will be listed separately. See Spare Parts for
more information on ordering spare parts.
BASIC GRABO® PRO-LIFTER 20 SCOPE OF DELIVERY:
GRABO® Pro-Lifter 20 (tool only)
l
Battery
l
Operator's manual
l
12
Perpendicular holding force
170 kg/375 lbs
170 kg/375 lbs
110 kg/242 lbs
100 kg/220 lbs
100 kg/220 lbs
80 kg/176 lbs
80 kg/176 lbs
75 kg/165 lbs
⓫
Parallel holding force
120 kg/265 lbs
120 kg/265 lbs
110 kg/242 lbs
100 kg/220 lbs
65 kg/143 lbs
80 kg/176 lbs
80 kg/176 lbs
65 kg/143 lbs
900 ON-OFF cycles of 10 seconds
20 l/min (0.7cfm)
Peak/valley heights less than 3 mm/0.1 inch, arc
less than 5°
Multi-socket battery charger
l
Fabric bag OR Blow mold case
l
⓬