Heat Recovery; Load Mount - MELAG Vacuclave 550 Manual De Uso

4 Description of the device

Heat recovery

The Recovery symbol indicates active heat recovery.
The heat from the wastewater is transmitted to the feed water, reducing the need to heat the feed water. By recovering
this heat, electricity consumption is significantly reduced.
The power recovered through heat recovery is shown in green.
The energy saved over time can be displayed in the Status log.

Load mount

The device is delivered without a mount for holding trays or cassettes. No mount is necessary for the sterilization with
sterilization containers or MELAstore Boxes, but MELAG still recommends the use of the loading slide.
Depending on the typical load, various accessories can be combined with the device.
For detailed instructions on the use of the accessories and their combinability with different load holders, see the section
Mounts and loading slide [} page 26] and the document "Accessories for small steam sterilizers user manual".
19