MELAG Vacuclave 550 Manual De Uso página 44

11 Settings
Program options
In the Settings > Program options menu, you can set default settings for program options.
1.
Press the button with the arrow to make changes.
2.
Activate or deactivate the desired setting by selecting or
deselecting it.
3. Confirm the changes with OK.
4. Press SAVE to accept the changes.
The following settings are possible:
Device mode
Vacuclave
Drying
You have the option to change the preset drying mode once at the program start via Program options.
Time-controlled drying
In the case of timed drying, the duration of the drying phase is determined by the program.
If you want to activate time-controlled drying, proceed as follows:
Press the drying button to select the option Time-controlled if you want time-controlled drying to take place
u
during the next program run.
Intelligent drying
In contrast to a conventional time-controlled drying process, the duration of the intelligent drying is automatically calculat-
ed using the residual moisture in the sterilization chamber. The drying phase is ended as soon as the load is dry. A num-
ber of factors play a role in this process including e.g. the type of the load, wrapped or unwrapped, the load quantity, the
distribution of the load in the sterilization chamber etc.
If you want to activate intelligent drying, proceed as follows:
Press the drying button to select the option Intelligent if you want intelligent drying to take place during the
u
next program run.
PLEASE NOTE
Intelligent drying is activated in the delivery state.
44
Designation
Drying: Intelligent
Drying: Time-controlled
Short description
Automatically monitors and ends the drying phase once
the load is dry.
Ends the drying phase after a specified duration.