MELAG Vacuclave 550 Manual De Uso página 50

11 Settings
Select the Software update menu.
1.
2. Insert a USB stick with the installation data in any USB
connection.
3. Press NEXT to perform the software update.
Ê
During the software update, the device independently performs
one or more restarts.
See also:
▪ Log list [} page 36]
Network
In the Settings > Network menu, you can select an automatic configuration via DHCP or enter the required address
details manually.
The following must be fulfilled or present:
The logged-in user role is: Administrator or Service technician.
ü
1. Press the button with the arrow to make changes.
2. Press SAVE to accept the changes.
Logging on user role
To log on a user role, proceed as follows:
1.
Press the user role button.
2. Select the desired role, e.g. Administrator.
50