Administrative Settings - MELAG Vacuclave 550 Manual De Uso

11 Settings
Label print
In the Settings > Label print menu, you can configure the label printer and set default settings.
The label printer can be connected via USB or via integration into a local network (LAN). If several devices access the la-
bel printer, it must be integrated via a local network (LAN).
1. Press the button with the arrow to make changes.
2. Activate or deactivate the desired setting by selecting or
deselecting it.
Ê
For the option Automatic a dialogue follows for the definition
for which programs the automatic label print should take place.
3. Confirm the changes with OK.
4. Press SAVE to accept the changes.
The following settings are possible:
Option
Deactivated
Manual
Automatic (immediately
after program run)
PLEASE NOTE
The last storage time set during label printing is taken over individually for each program as a
presetting for the next label printing.
See also:
▪ Label printer as output medium

Administrative settings

To make administrative settings, such as changes to the user administration, you must log on as an Administrator or
a Service technician.
See also:
▪ Logging on user role [} page 50]
46
Description
No label printing
Manual label printing
Automatic label printing after the end of the program for
the defined programs
[} page 39]