essentiel b ED2 Instrucciones De Uso página 21

CHANGING THE SETTING DURING THE PROCESS
If you want to change the temperature or time setting during the dehydration
process:
- Briefly press the
will flash on the display.
- While the time is flashing on the screen, press the +
and - buttons to change the timer setting.
- Briefly press the
temperature will flash on the display.
- While the temperature is flashing on the screen,
press the + and - buttons to change the temperature
setting.
- After about 2 seconds, the values are saved and
appear permanently on the display.
PAUSING THE DEHYDRATION PROCESS
If you want to temporarily stop the appliance
from operating, e.g. to check whether the food is
sufficiently dehydrated:
- Briefly press the
The fan stops. You will see the message "PA"
displayed on the screen.
- Press the button again to restart the appliance.
CANCELLING THE DEHYDRATION PROCESS
If you want to shut down the appliance completely
before the time is up:
- Press and hold the
"00" is displayed on the screen.
button, and the remaining time
button again, and the set
button to pause the appliance.
button until the fan stops and
2
Hr

°C
45

PA

00

21