Customer Service And Spare Parts - SATA SATAjet 2000 LAB HVLP Instrucciones De Servicio

SATA LAB Automatic Gun Operating Instructions
EN
Malfunc-
tion
Flat fan
control does
not work.
Flat fan
control
cannot be
regulated.
Automatic
gun does
not shut air
off.
Corrosion
on air cap
thread,
material
passage
or nozzle
head.
112
All manuals and user guides at all-guides.com
Cause Correc-
tive ac-
Air distribu- Put air
tion ring not distribution
in correct ring in cor-
position. rect position
(see chap-
ter 10.2).
Air distri- Replace air
bution ring distribution
damaged. ring (see
chapter
10.2).
Overwound Remove
control. spindle, un-
Loose spin- lock and in-
dle. stall again.
Replace
spindle if
necessary
(see chap-
ter 10.4).
Soiled Clean con-
control trol piston
piston seat seat. Re-
or worn seal place seal
retainer. retainer if
necessary
(see chap-
ter 10.8).
Control air Release
pressure is control air
constantly pressure.
present.
Unsuitable Replace
cleaning nozzle
solution. head. Heed
cleaning
instructions
(see chap-
ter 10.3).
Malfunc- Cause
tion
Air leaks Defective
from inspec- seal retain-
tion hole er (air side).
of material
flow control
or regulat-
ing cap.
Defective
seal or
sleeve.
Material Defective
leaks from paint needle
behind sealing
the paint
needle seal
through the
gun body
inspection
hole.
Paint nee-
dle clogged
or dam-
aged.
Automatic Contam-
gun drips ination
out of the between
fluid tip. paint needle
tip and fluid
tip.
Damaged
nozzle set.
13. Customer service and
spare parts
Customer service department
SATA GmbH & Co. KG
Domertalstraße 20
D-70806 Kornwestheim
Automatic gun spare parts
Correc-
tive ac-
Replace
paint needle
seal re-
tainer (see
chapter
10.3).
Replace
seal or
sleeve (see
chapter
10.7).
Replace
paint needle
seal re-
tainer (see
chapter
10.3).
Replace
nozzle set
(see chap-
ter 10.1).
Clean fluid
tip and paint
needle.
Replace
nozzle set
(see chap-
ter 10.1).