Tabla de contenido
Publicidad
All manuals and user guides at all-guides.com
Notice!
Use of aggressive cleaning
agents can damage the automat-
ic gun.
→ Do not use aggressive cleaning
agents.
Use only suitable cleaning fluids
for cleaning.
→ Use neutral cleaning agent with
pH-value of 6–8.
→ Do not use acids, alkalis,
bases, paint stripper, unsuitable
regenerates or other aggressive
cleaning agents.
Immersing the automatic gun in
the cleaning fluid can cause cor-
rosion.
→ Do not immerse automatic gun
in cleaning fluid.
Improper cleaning tools can dam-
age the bores and have a nega-
tive effect on the spray pattern.
→ Use only SATA cleaning brush-
es.
→ Never use ultra-sonic cleaning
equipment.
12. Troubleshooting
The troubleshooting chart below
lists malfunctions, causes and rem-
edies.
If it is not possible to rectify a
malfunction with the remedies de-
scribed, send the automatic gun in
to the SATA Service Department.
Operating Instructions for SATA LAB Automatic Guns
(see Chap. 13 for address).
Malfunc-
tion
Spritzstrahl
unruhig
Spritzbild
zu klein,
schräg, ein-
seitig oder
spaltet.
Flat fan
control does
not work.
Cause
Correc-
tive ac-
Paint nozzle
Retighten
not tight-
paint noz-
ened suffi-
zle.
ciently.
Air distri-
Replace air
bution ring
distribution
dirty or
ring (see
damaged.
Chap. 10.2).
Air nozzle
Tighten air
loose.
nozzle ring
hand tight.
Space
Clean in-
between air
termediate
and paint
space.
nozzle dirty.
Nozzle set
Clean noz-
dirty.
zle set.
Damaged
Replace
nozzle set
nozzle set
(see Chap.
10.1).
Bore in
Clean air
air nozzle
nozzle (see
clogged
Chap. 10.1).
with paint.
Paint nozzle
Check paint
tip (paint
nozzle tip
nozzle in)
for damage.
damaged.
Replace
nozzle set,
if necessary
(see Chap.
10.1).
Air distri-
Position air
bution ring
distribution
incorrectly
ring cor-
positioned.
rectly (see
Chap. 10.2).
Air distri-
Replace air
bution ring
distribution
damaged.
ring (see
Chap. 10.2).
US
431
Publicidad
Tabla de contenido
