Tabla de contenido
Publicidad
Operating Instructions for SATA LAB Automatic Guns
US
Use other than intended
The automatic gun is not intended
for use with foodstuffs or for appli-
cation of unsuitable materials such
as acids or bases.
4.
Technical Data
See attached technical data sheet
for technical data and dimensions.
5.
Scope of Delivery
■ Automatic gun with selected nozzle
set
■ Fixing bolt
■ Tool kit
■ Plastic gravity flow cup, 0.6 L
■ Spray pattern with test log
6.
Technical Design
Automatic gun
[1-1] Fastening bolt (screwed into
fastening thread)
[1-2] Material flow control
[1-3] Graduated collar for material
flow control
[1-4] Inspection hole for material
flow control
[1-5] Flat fan control dial
[1-6] Flat fan control (B)
[1-7] Nozzle set
[1-8] Nozzle head
[1-9] Spray gun body (control
part)
[1-10] Graduated collar locking
screw
[1-11] Control air connection (ST)
[1-12] Atomization air connection
(SP)
[1-13] Material flow control dial on
gun body
422
All manuals and user guides at all-guides.com
[1-14] Round fan control (R) set to
optimum value, not adjust-
able
[1-15] Gravity flow cup connector
[1-16] Gun body inspection hole
[1-17] Gravity flow cup
[1-18] Screw-on lid
[1-19] Lid plug
Tool kit
[2-1] Extraction tool
[2-2] Cleaning brush
[2-3] Socket wrench (7 mm)
[2-4] Allen wrench (4 mm)
[2-5] Universal wrench
7.
Description
The automatic gun consists of two
primary components: the nozzle
head and gun body.
Nozzle head
■ Nozzle head [1-8] (rotates in 90°
increments)
■ Air nozzle (adjustable in increments
of 45°, SATAminijet infinitely adjust-
able)
■ Paint nozzle
■ Gravity flow cup connector [1-15]
Spray gun body
■ Gun body [1-9]
■ Round fan control [1-14] set to opti-
mum value, not adjustable
■ Flat fan control [1-6] with dial [1-5]
■ Material flow control [1-2] with dial on
gun body [1-13] and graduated collar
[1-3]
■ Fastening bolt [1-1]
■ Control air connection [1-11]
■ Atomization air connection [1-12]
Publicidad
Tabla de contenido
