Fluke 3563 Guía De Funcionamiento Básico página 26

From the Sensor – Permanent Installation screen select sensor that is installed
permanently. From the Orientation drop-down menu, select the orientation in
which the sensor was installed. Refer to page 34 for information on asset
orthogonal axes.
Once the mounting orientations for all permanently mounted sensors are selected,
tap Continue to finish the sensor installation process and proceed with the
permanent installation of the gateway.
Mount gateways permanently then finish Fluke Connect mobile app app process
1. Mount the gateway(s) permanently at the determined position as described in
Mount the Gateway on page 35.
2. After mounting the gateway(s) permanently, return to Fluke Connect mobile app
app to finalize the permanent installation process.
Select Gateway and Sensor to Install
23