Fluke 3563 Guía De Funcionamiento Básico página 12

NOTE: The asset default speed is required to access the Tasks and Alarms editor.
The asset power and mounting foundation are required if the user wants to apply
the recommended alarm limits.
4. Use the Components editor to define the asset components.
Use the drop-down menus to define driver and driven components.
5. In the Test Points editor, click the Add test point tab at the respective
components, then use the drop-down menus to define the required test points:
y Test point name – edit name
y Position on the machine – define test point position
y Orientation – define sensor orientation at the test point
6. Use the Tasks and Alarms editor to configure the vibration trends to be measured
and the alarm limits to be set. There is the possibility to apply recommended
alarm limits that are based on verified ISO standards and experience.
Detailed information about the different trend measurements is available on the
software online help which may be accessed at any time by clicking
header.
9
Setting up Assets
on the