Fluke 3563 Guía De Funcionamiento Básico página 28

Safety symbols
WARNING
NOTE
Other symbols
General safety
WARNING
 Read all safety information before you use the system.
 Carefully read all instructions.
 Use the system only as specified, or the protection supplied by the system
can be compromised.
 Do not use the system if it operates incorrectly.
 Use only specified replacement parts.
 Have an authorized Fluke service center repair the system.
 The system must never be used in wet environments.
The WARNING symbol denotes information
which must be followed in order to avoid
personal injury.
NOTE denotes information which must be
followed in order to avoid damage to equipment.
The Electrical hazard symbol is used to identify
electrical hazard and high voltage areas.
Denotes that any waste electrical and electronics
parts of the system including memory sticks
must be disposed of according to applicable
safety and environmental regulations.
Denotes separate collection for all batteries,
accumulators and battery packs, for recycling or
environmentally sound disposal.
Denotes that the product is made of parts that
are recyclable.
25
Finish Mounting Process