ENG
3.1
Manual mode (Service and Installer menu)
During fi rst start-up or maintenance, "manual mode" may be useful in order to check the operation of the main devices on the
humidifi er. Manual mode is only available when the unit is OFF and without any active alarms. In addition, to safeguard the unit,
the heaters can only be activated when there is water in the boiler (high level, corresponding to green LED on)
IMPORTANT: manual mode should only be activated by qualifi ed personnel; improper use may cause serious damage
to the unit.
Index
Description
Ef01
Manual mode
Ef02
Manual management of outputs
Ef03
Manual request management
18
3. MANUAL PROCEDURES
Parameter
Enable "Manual mode" to check operation of the individual components.
Default: Disabled
Possible settings: Disabled, manual outputs, manual production
Remarks: when exiting "Manual mode", the settings are restored and normal operation
resumes automatically. If the user does not set any parameters in the "Manual mode" menu for
30 minutes, manual mode is automatically disabled.
Enable "Manual mode" to check operation of the individual components.
Test fi ll valve Test drain pump
Activate the blower relay
Manually set the production request.
Tab. 3.a
gaSteam +0300123ML rel. 1.0 - 03.12.2021