Reinserting The Brew Group - Gaggia Milano ANIMA Manual De Instrucciones

3
1
1
2
4219-465-09541 MANUAL GAG. ANIMA PLUS EN-ES-PT Rev 00.indd 19
8 Wait for the machine to perform an automatic rinse cycle.
9 Perform the "Brew Group Cleaning under Running Water" operation.
10 Push the buttons on the sides of the drip tray (1) and remove it with the coffee
pucks container (2). Empty them and insert them in the machine again.
11 Press the AROMA STRENGTH button and select pre-ground coffee.
12 Press the LONG ESPRESSO button. The machine dispenses water from the
coffee dispensing spout.
13 Repeat steps 11 and 12 twice. Throw away the dispensed water.

Reinserting the Brew Group

1 Before reinserting the brew group into the machine, make sure that the two
reference indicators on the side coincide. If this is not the case, perform the
following step:
Make sure that the lever is in contact with the brew group base.
2 Ensure that the yellow locking hook of the brew group is in the right position.
To correctly position the hook, push it upwards to the highest possible position.
ENGLISH
19
06/04/2022 11:13:18