General Specification - TensCare Sure PRO Instrucciones De Uso

https://ec.europa.eu/docsroom/documents/36683/attachments/1/translations/en/rendi
tions/pdf

21. GENERAL SPECIFICATION

Waveform
Max Intensity
Channels
Max Pulse energy
Output plug
Power
Battery life
Weight
Dimensions
Safety classification Internal power source
Environmental Specifications
Operating:
Storage:
Type BF
Equipment
IP22
Applied Part
Asymmetrical rectangular
99mA zero to peak. Setting 0-99 in steps of 1 OC cut-out below
160 Ohm
Constant voltage 470 to 2000 Ohm
Constant current 160 to 470 Ohm
Dual channel
Total output limited to 25 μC per pulse
Fully shielded: touch proof
Built-in Li-ion polymer battery
Ratings: 900 mAh, 3.33Wh, 3.7V
At least 10 hours at 50 mA 300 μs 50 Hz
90 g without batteries
115 x 56 x 23mm
Temperature range: 5 to 40⁰C
Humidity: 15 to 90% RH non-condensing
Atmospheric pressure: 70 kPa to 106 kPa
Temperature range: -10 to +60⁰C
Humidity: 15 to 75% RH non-condensing
Atmospheric pressure: 70 kPa to 106 kPa
Equipment providing a degree of protection against electric
shock, with isolated applied part.
This symbol on the unit means "Refer to Instructions for Use"
The unit is not water resistant and should be protected from
liquids.
Complies with EU WEEE regulations.
Vaginal and anal electrodes and skin surface electrode pads.
See section 18.
38