Porsche Mobile Charger Connect Manual De Instrucciones página 79

Settings
System
Demo mode
This setting is only visible to the Customer service
user. In demo mode, the charger's functions can be
conveniently displayed and a charging process simu-
lated. Settings made in demo mode are not applied.
b The Customer service user is logged in.
e
Enable the function.
Next time you log into the Web Application, demo
mode will be disabled once more.
Changing a password
You can change the login password for the web ap-
plication. The new, chosen password overwrites the
initial password from the letter containing access
data.
e
Select Change and enter a new password.
Activating device protection
A PIN prompt protects your charger and prevents
an unauthorised person from connecting a vehicle to
your charger.
1. Enable the function.
2. Enter a 4-digit PIN and confirm.
3. Enter the PIN again and confirm.
�� Activation of the PIN prompt is confirmed.
Enter this PIN to unlock the charger.
Enabling a guest PIN
In addition, you can create a guest PIN for another
user.
e
The procedure is the same as when you assigned
a PIN to protect the device.
Information
The guest user will not be able to configure the
charger.
Controlling energy consumption
Activate standby mode to save electricity. Standby
mode begins as soon as charging is finished.
e
Enable Standby mode.
The device needs some time to exit standby
mode and become ready to use once more.
Information
The charger automatically switches to standby mode
after a longer period of inactivity. first, the brightness
of the display is dimmed, then the display is switched
off. Press the Power button to start it up again.
Enter language and country
Field Explanation
Language Selects the language
for the Web Applica-
tion.
Country The country of use.
The configuration set-
tings vary depending on
country. If you enter
a country that is not
the actual place of use,
some settings may not
be available.
Enter date and time
Field Explanation
Date and time When there is a net-
work connection, the
date and time are ap-
plied automatically.
Time zone: Can be se-
lected manually.
Set time: Enter a time if
the network time is not
available as a reference.
Units
Select the parameters and units you wish the charger
to use.
Equipment display
This setting determines the brightness of the charg-
er's display.
Charging
Mains status
This setting is only visible to the Customer service
user. The charger automatically detects the informa-
tion on the mains status shown here.
Operating
77