Transporting The Machine - Orbitalum RPG 3.0 Traducción Del Manual De Instrucciones Original

RPG 3.0, RPG 4.5 (S), RPG 8.6
7.1

Transporting the machine

NOTe!
1. Attach a compliant lifting aid to the machine (see the figure at the bottom right).
2. Lift the machine and position it directly onto the workbench (or into the transport box).
3. Check that the machine has a solid footing.
Transport in a packed state on a pallet and with a corresponding forklift truck (e.g lift truck).
4. Transport the machine only with a blocked on/off
switch. To to this bring the pictured right/left switch into
the center position. The On/Off switch in blocked in the
center position to prevent an unintended startup.
Battery variant (RPG 3.0): Set the switch in the center position to block the on/off switch
[REV. 20210302] OC_RPG_L_BA_790038761_01__INH-02_EN
Only transport the RPG in a packed state on a pallet with corresponding forklift truck or with
2 persons.
Remove the machine from the packaging and replace again.
Storage and transport
Electric variant (RPG 3.0): Set the switch in the center position to block the On/
Off switch
Orbitalum Tools GmbH D-78224 Singen www.orbitalum.com
eNGLISH
55