Rpg 3.0; Rpg 4.5 And Rpg 8.6 - Orbitalum RPG 3.0 Traducción Del Manual De Instrucciones Original

eNGLISH
Setup and assembly
8.4.1

RPG 3.0

1. Loosen the clamping screw so that the clamping shell is
completely open.
2. Insert the pipe with distance to the tool and support the
pipe, if required.
3. Clamp the pipe by means of the clamping screw.
4. Check pipe for firm seating.
X To loosen the pipe from the machine open the clamping
screw.
8.4.2

RPG 4.5 and RPG 8.6

1. Open the clamping shells by shifting the clamping lever.
2. Insert the pipe with distance to the tool and support the pipe, if required.
3. Clamp the tube in by means of the clamping lever.
4. Check the tube for correct clamping.
5. The tube can now be machined.
X To release the tube from the machine, move the clamping lever to open it.
60
ORBITALUM TOOLS GmbH D-78224 Singen www.orbitalum.com
RPG 3.0, RPG 4.5 (S), RPG 8.6
[REV. 20210302] OC_RPG_L_BA_790038761_01__INH-02_EN