Shifting The Adjusting Bolt - Orbitalum RPG 3.0 Traducción Del Manual De Instrucciones Original

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 139
eNGLISH
Setup and assembly
RPG 3.0, RPG 4.5 (S), RPG 8.6
8.4.5

Shifting the adjusting bolt

1. Loosen the clamping lever and remove the tube, if necessary.
2. Loosen the hexagon socket screw of the adjusting bolt using the Allan key.
3. Turn the adjusting bolt towards + or – .
4. Allow the pin to engage into the adjusting bolt and re-tighten the hexagon socket screw.
5. Now, the tube can be clamped in.
62
ORBITALUM TOOLS GmbH D-78224 Singen www.orbitalum.com
[REV. 20210302] OC_RPG_L_BA_790038761_01__INH-02_EN

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Rpg 4.5Rpg 4.5 sRpg 8.6

Tabla de contenido