Publicidad
Idiomas disponibles
Idiomas disponibles
• Clean all individual parts with a solution prepared according
to the manufacturer's instructions.
In case of visible soiling, use a medium-soft brush (e.g. a
toothbrush) which is used exclusively for this purpose.
If the recommended application period is exceeded signi-
ficantly, the plastic parts may take on the smell of the me-
dium used.
RINSING:
• Rinse off all parts thoroughly in running water at about 15 °C
for 3 minutes.
DRYING:
• Shake the water out of all of the parts.
• Place all parts on a dry, clean and absorbent surface and al-
low them to dry completely.
– 33 –
Publicidad
