Installation; Standard Equipment; Preparation - Mettler Toledo GM303 Instrucciones De Manejo

1. Installation

3
4
Version A
1 hole with
Philips screw

1.1 Standard equipment

5
1
(1) Keypad with connection cable to GM bus
(2) Cable guide
(3) Set of screws with aluminum foot for version A balances
(4) Set of screws for version B balances
2
(5) Yellow protective cap for cone

1.2 Preparation

• Disconnect balance from power supply.
• Remove balance pan and pan support.
• Mount yellow protective cap on cone.
• Turn balance upside down with base facing upward.
• Determine balance version with the aid of the adjacent illustrations.
Version B
2 holes
3