Descargar Imprimir esta página

Beem W929735 Manual De Instrucciones página 30

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

EN
Never pour water into the water tank when the device is switched on or during the
brewing process. Allow the device to cool down before fi lling it again.
Do not move the device during the brewing process.
Keep items of clothing such as scarves, shawls, jewellery, ties and long hair away from the bean
container and the grinder shaft.
Do not reach into the bean compartment and the grinder shaft and do not insert any objects
when the device is in operation!
In the interest of your own safety, inspect the device and the connecting cable for damage
each time before you use it. Use the device only if it is in working order.
Make sure that the connecting cable does not present a trip hazard. The connecting cable
should not hang down from the surface on which the device is placed in order to prevent the
device from being pulled down.
WARNING – Danger of Fire
Do not connect the device along with other consumers (with a high wattage) to a multiple
socket in order to prevent overloading and a possible short circuit (fi re).
Do not operate the device in the vicinity of combustible materials. Do not place any
combustible materials (e.g. cardboard, paper, wood or plastic) in or on the device.
Do not cover the device during operation.
NOTICE – Risk of Damage to Material and Property
The device should only be used if it has been correctly assembled! Before each use, check
whether the bean container, portafi lter and water tank are inserted correctly!
Switch off the device and pull the mains plug out of the plug socket if an error occurs during
operation, when there is a power cut or before a thunderstorm.
When you pull it out of the plug socket, always pull on the mains plug and never the mains
cable!
Never pull or carry the device by the connecting cable.
Protect the device from other heat sources, fi re, sub-zero temperatures, persistent moisture
and impacts.
Use only original accessories from the manufacturer in order to guarantee that there is no
interference that may prevent the device from working and to avoid possible damage.
30

Publicidad

loading