Beem W929735 Manual De Instrucciones página 43

Idiomas disponibles

13. Clean the grinder on the inside with the cleaning brush.

14. Place the grinding collar back on the grinder and twist it to the right until it slides down on the

grinder and you feel it engage.

15. Place the bean container back on and ﬁ ll it again (see the "Preparation" chapter – "Adding

Espresso Beans").

Descaling

Limescale deposits have an adverse effect not only on the quality of the coffee and the water, but

they also cause power losses and shorten the lifespan of the device. The thicker a limescale layer is,

the more difﬁ cult it is to remove.

The device indicates via the control lamp CLEAN / DESCALE (29) when the device needs to be

descaled.

For descaling we recommend the BEEM Premium Descaler Concentrate. The efﬁ cient, food-

safe and environmentally friendly BEEM Premium Descaler Concentrate is available from selected

specialist stockists, via our website www.beem.de or from our customer service department on

request.

Descaling with the BEEM Premium Descaler Concentrate

1. Fill the water tank (6) up to the MAX marking with a concentrate/water solution of no more

than 1:20 (one part concentrate to 20 parts water). There should be at least 1 litre in the

water tank.

2. Make sure that the drip tray (13) is empty and is ﬁ tted in the device correctly and the

portaﬁ lter (16) with the double sieve insert (21) has been inserted in the portaﬁ lter

mount (10) (see the "Preparation" chapter).

3. Place a suitable vessel under the portaﬁ lter and under the steam nozzle (9).

4. Touch and hold the ﬁ elds

process.

When the control lamp CLEAN / DESCALE (29) ﬂ ashes quickly, perform the following steps:

5. Move the steam power control (8) to position

The control lamp CLEAN / DESCALE lights up and the ﬁ eld

STEAM / HOT WATER (27) ﬂ ash.

The water pump operates, hot water emerges from the portaﬁ lter mount and the steam

nozzle for approx. 2 minutes.

6. Once water stops coming out, turn the steam power control to position .

IMPORTANT: The following two steps must be performed within the next 5 minutes for the

descaling process to be continued.

7. Empty the water tank and reﬁ ll it with clear water.

8. Empty the two vessels.

(24),

(26) and

(Steam).

(25). The device starts the descaling

(22) and the control lamp