Publicidad
Idiomas disponibles
Idiomas disponibles
Riduttori e Variatori
Istruzioni per installazione ed uso
2. GENERAL INFORMATION
2.1 PURPOSE
Before commissioning the unit, read the installation instructions carefully.
The ATEX certification and marking are not recognized if you do not follow the recommendations listed below.
These instructions, with its attachments, if any, shall be kept in the immediate proximity of the installed product to be
consulted in case of need. Products with special variants may differ from the descriptions and require specific and/or
additional information included in any attachments. If further clarification is required, contact MOTOVARIO TECHNICAL
SERVICE.
The personnel operating on the unit itself must have precise technical skills, experience and abilities, in addition to
possessing the necessary tools and the necessary security guards PPE (according to the current laws). Failure to comply
with these requirements may result in problems to the safety and health of people. For specific safety information read
the relevant paragraphs. The variator/reducer is a component that can reach high temperatures (for the variator even
when idling or low loaded). Do not touch the surface with bare hands and provide the necessary safety guards.
2.2 SYMBOLS
CAUTION - DANGER
Indicates a serious personal health and safety hazard.
CAUTION - HOT PARTS
Indicates a serious heat personal health and safety hazard.
CAUTION - HIGH VOLTAGE
Indicates a serious personal health and safety hazard due to the presence of dangerous voltage.
IMPORTANT INFORMATION
Indicates important technical information.
QL0214 ∕ REV.6
91
Publicidad
