Publicidad
Idiomas disponibles
Idiomas disponibles
2. Assembly Instructions
CAUTION! Risk of injuries from heavy components and from improper assembling!
Tighten all individual parts and pre-assembled parts firmly!
•
•
Check the tightness again before each training session!
Perform the assembly with a second, adult and sufficiently strong person.
•
2.1. FOOT STAMP INSTALLATION
Screw two foot stamps (24) each into the front (7) and rear (8) stands.
•
By adjusting the screw-in depth, you can align the device horizontally. Always make sure to keep
a minimum screw-in depth.
7
24
2.2 INSTALLATION
OF THE STANDS
Remove two bolts (113), two washers
•
(53) and two PVC washers (21) from
each stand (7 and 8) and keep them
safely.
Position front stand (7) in front of the
•
main frame (1). Align the screw holes.
Fix the front stand (7) to the main
•
frame (1) with the previously removed
connecting parts, as shown in the
illustration.
Fix the rear stand (8) to the main
•
frame in the same way.
24
8
24
1
M8 x 50 mm
113
M8 x 15 mm
19
24
113
53
21
7
113
53
21
8
Ø8 x Ø16 mm
53
Ø10 x Ø2 mm0
21
EN
DE
29
Publicidad
