Publicidad
Idiomas disponibles
Idiomas disponibles
2.4 INSTALLATION OF THE ARM BARS AND FOOT BARS
Remove two bolts (36), two spring washers (37), two large washers (38) and two washers (39)
•
on the left and right of front pillar (2) and keep them safely.
Left side
Fix the left arm bar (3) to the left horizontal axis of the front pillar (2), with the parts previously
•
removed on the left, as shown in the illustration.
•
Take left-hand threaded bolt (57; marked 'L'), and matching nylon nut (62).
•
Fix U-bracket (60) of left foot bar (4) to left crank (106): with left-hand thread bolt (57), wave
spring washer (58), spring washer (61) and left-hand thread nylon nut (62). Tighten bolt (57)
anticlockwise.
Fix the cover of the foot bar holder (56) with screw (29) to the left foot bar (4).
•
Right side
Fix the right arm bar (5) to the right horizontal axis of the front pillar (2), with the parts previously
•
removed on the right, as shown in the illustration.
•
Fix the U-bracket (60) of the right foot bar (6) to the right crank (107, not visible in the picture)
with right-hand threaded bolt (63), wave spring washer (58), spring washer (61) and right-hand
threaded nylon nut (64) . Tighten bolt (63) clockwise.
Fix foot bar holder cover (56) with screw (29)
•
to right foot bar (6).
39
38
37
36
3
1/2" bolt
left-hand thread
1/2" bolt
Standard (right-hand thread)
ST4,2 x 20 mm
M8 x 20 mm
5
2
4
56
60
29
58
57
1/2" nylon nut
57
L
left-hand thread
1/2" nylon nut
63
R
Standard (right-hand thread)
29
Ø8 x Ø25 mm
36
36
37
38
39
6
61
64
62
61
62
64
Ø8 mm
37
38
56 29
63
58
60
106
Ø38 x 3 mm
39
Ø28 x Ø17 x 0,3 mm
58
Ø13 x Ø20 x 2 mm
61
EN
DE
31
Publicidad
